Pro Touch Adjust-a-Bond is used to give you more time to adjust the positioning of your hair unit, before applying a lace wig or toupee.
No matter what type of hair system you wear or attachment method you're using, ProTouch Adjust-A-Bond should be a standard tool in your bathroom. It's been called "a hair wearer's best friend" and here's why...
You get up to 1 full minute to adjust and position your system into just the right spot before the adhesive begins to dry
Use it to clean and touch up your lace front hairline
Use it to safely clean the solvents and residue from your scalp
It makes a great scalp freshener
Great for use with both hairpiece tape and liquid bonding adhesives, Adjust-A-Bond is a safe, reliable spray with many different uses.
Using Adjust-A-Bond when attaching your hair system
First spray a light mist onto the adhesive surface of the unit and onto your scalp
Next place your hair system onto your head and adjust into place (you'll have approximately 1 minute)
Allow the Adjust-A-Bond to evaporate (about 2 minutes) completely and then firmly press down on the system
Using Adjust-A-Bond to clean-up your lace hairline
We all know that dust and dirt can easily stick to the adhesive in our lace hairline. Luckily, you can use Adjust-A-Bond to touch up and clean it in less than 5 minutes!
Begin by spraying a generous amount (approximately 5-7 pumps) of the Adjust-A-bond onto a piece of folded toilet paper or paper towel.
You want to be sure the toilet paper is folded thick enough so it won't tear from the moisture.
After you have sufficiently dampened the paper towel or toilet paper, pull back and hold the hair away from your hairline. Grasping the very edge or corner of the toilet paper, you can then begin to wipe away the visible dirt or adhesive residues.
Be sure you do this very gently so you won't risk any damage to your system. We also recommend wiping in a downward direction away from your hair, this will help keep the front edge of your hair system securely attached to your scalp.
Price: £9.99
Pro Touch Leave In Conditioner Spray for Hair Systems
Using a conditioner is a very important step for both human or synthetic hair. This is a conditioner designed to spray on and leave in. Great for human and synthetic hair!
By using this high quality conditioner after each shampoo you are insuring the longevity of your hair investment because the comb or brush will glide through the hair and not damage it. Also your hair will have protection from UV rays.
Directions:
Spray a light to heavy mist directly onto the hair before styling. Leave-in all day, no need to rinse or wash out.
4 fl. oz.
Price: £7.99
Pro Touch No Sweat Perspiration Control
Scalp perspiration is frustrating to novice and veteran hair-wearers alike, particularly in hot weather or when exercising. Sweat can weaken your bond, shift your placement and shorten wear time.
No Sweat works by fusing to the oils and salt in your perspiration, forming an iron curtain between them and your bond. It’s that simple.
Totally safe and simple to use, just add this light, pleasant-smelling spray-on application to your normal attachment routine and you'll:
Save money by extending the life of your adhesives.
Save time by helping you get your attachment right the first time (When used with Adjust-A-Bond or Just Rite Positioning Spray).
Stop hair from shifting while showering or working out.
Halt the gooey mess that sweat can make of tapes and glues.
Prevent the white glue "milkiness" that perspiration creates before the adhesive is fully-cured.
Directions:
Make sure scalp is clean and dry. Before applying your hairpiece, spray a thin coat of No Sweat directly onto your scalp. Allow to dry, then use your preferred attachment method.
Please note: If you use Adjust-A-Bond or Just Rite, apply No Sweat prior to using Adjust-A-Bond or Just Rite Positioning Spray. This product needs to be applied after you have cleansed your skin with 99% alcohol, before you apply glue or tape to your skin.